|
Server IP : 128.199.20.84 / Your IP : 172.70.130.171 Web Server : Apache/2.4.41 (Ubuntu) System : Linux competent-maruti 5.4.0-128-generic #144-Ubuntu SMP Tue Sep 20 11:00:04 UTC 2022 x86_64 User : www-data ( 33) PHP Version : 8.0.20 Disable Function : pcntl_alarm,pcntl_fork,pcntl_waitpid,pcntl_wait,pcntl_wifexited,pcntl_wifstopped,pcntl_wifsignaled,pcntl_wifcontinued,pcntl_wexitstatus,pcntl_wtermsig,pcntl_wstopsig,pcntl_signal,pcntl_signal_get_handler,pcntl_signal_dispatch,pcntl_get_last_error,pcntl_strerror,pcntl_sigprocmask,pcntl_sigwaitinfo,pcntl_sigtimedwait,pcntl_exec,pcntl_getpriority,pcntl_setpriority,pcntl_async_signals,pcntl_unshare, MySQL : OFF | cURL : ON | WGET : ON | Perl : ON | Python : OFF Directory (0755) : /usr/src/linux-headers-5.4.0-216/include/linux/spi/ |
| [ Home ] | [ C0mmand ] | [ Upload File ] |
|---|
/* SPDX-License-Identifier: GPL-2.0 */
#ifndef __LINUX_SPI_DS1305_H
#define __LINUX_SPI_DS1305_H
/*
* One-time configuration for ds1305 and ds1306 RTC chips.
*
* Put a pointer to this in spi_board_info.platform_data if you want to
* be sure that Linux (re)initializes this as needed ... after losing
* backup power, and potentially on the first boot.
*/
struct ds1305_platform_data {
/* Trickle charge configuration: it's OK to leave out the MAGIC
* bitmask; mask in either DS1 or DS2, and then one of 2K/4k/8K.
*/
#define DS1305_TRICKLE_MAGIC 0xa0
#define DS1305_TRICKLE_DS2 0x08 /* two diodes */
#define DS1305_TRICKLE_DS1 0x04 /* one diode */
#define DS1305_TRICKLE_2K 0x01 /* 2 KOhm resistance */
#define DS1305_TRICKLE_4K 0x02 /* 4 KOhm resistance */
#define DS1305_TRICKLE_8K 0x03 /* 8 KOhm resistance */
u8 trickle;
/* set only on ds1306 parts */
bool is_ds1306;
/* ds1306 only: enable 1 Hz output */
bool en_1hz;
/* REVISIT: the driver currently expects nINT0 to be wired
* as the alarm IRQ. ALM1 may also need to be set up ...
*/
};
#endif /* __LINUX_SPI_DS1305_H */